• Share
• Comment
• Mixx It!
• Print

If you love tigers and have a lot of pencils that are always out of place, this tiger pencil holder will help put them in their place. This is a fun and useful craft for kids since it comes in handy both at school and at home.

What you'll need:

How to make it:

Print pattern below for Tiger Pencil Holder:

 
For the PC(90 dpi) - For the Mac (72 dpi)
 

1. Cut a piece of Tiger print to fit around the juice can. Glue to the can. Note: You may need to use rubber bands to hold the foam piece around the can. Remove rubber bands after the glue dries.
2. Print out pattern for the tiger face. Cut out pieces.
3. Trace around the tiger face pattern piece on the white craft foam.
4. Cut out the tiger face.
5. Glue the white piece on the tiger foam.
6. Trace around the nose piece on black craft foam.
7. Glue the nose piece on the white piece. (See photo for placement)
8. Cut one chenille stem in half. Bend for the mouth. Attach with glue at the bend.
9. Cut one chenille stem in half. Bend in half. Repeat for other half of chenille stem.
10. Glue the whiskers on the frame. (See photo for placement)
11. Repeat for other side of face with last chenille stem.
12. After glue is dry on chenille stems, separate whiskers gently.
13. Cut out 2 circles of white craft foam slightly larger than the wiggle eyes.
14. Glue the white circles on the Tiger foam. (See photo for placement)
15. Glue the wiggle eyes in the middle of the white circles.
16. Trace around the outer ear pieces on the Tiger print foam.
17. Cut pieces out.
18. Trace around the inner ear piece on white craft foam.
19. Cut pieces out.
20. Glue white inner ear pieces on the tiger ears. (See photo for placement)
21. Attach the ears to the inside of the can above the eyes with glue.
22. After everything is dry, add your pencils and display on your desk.

• Share
• Comment
• Mixx It!
• Print